1 1

X803-5
SKU: 000474
$399.99 $399.99
In stock: 6
Description
CTA-2006-D Value Maximum Dynamic Power 65W x4 + 350W x1 at 4ohms and ≤ 10% THD + N
Continuous Power Output 50W + 300W at 4ohms and ≤ 1% THD + N
Signal to Noise 77dBA x4
80dBA x1 reference 1 Watt RMS
Maximum Power Output MAX POWER 1600W
Rated Power Output at 14.4V A/B (4 Ohms) 50Watts RMS x 4 (4 Ohms, 20-20kHz, ≤1.0% THD)
A/B (2 Ohms) 75Watts RMS x 4 (2 Ohms, 1kHz, ≤1.0% THD)
SUB (4 Ohms) 300Watts RMS x 1 (4 Ohms, 20-200Hz, ≤1.0% THD) Other Channel
SUB (2 Ohms) 500Watts RMS x 1 (2 Ohms, 100Hz, ≤1.0% THD) Other Channel
A/B (Bridged 4Ohms) 150Watts RMS x 2 (Bridged 4 Ohms, 1kHz, ≤1.0% THD)
Specifications Signal to Noise Ratio 90dB (Reference: Rated Power into 4Ohms at 14.4V)
Frequency Response 20Hz-50kHz (+0dB, -3dB) A/B
Frequency Response 20Hz- (+0dB, -3dB) SUBch (Upper Feqency is depended on Low Pass Filter)
Frequency Response 20Hz-40kHz (+0dB, -1dB) A/B
Input Impedance 10k ohm
Speaker Impedance 4Ω (2Ω to 8Ω allowable)
Bridged Connection 4Ω to 8Ω allowable
Audio Section Low-Pass Filter Sub
Low-Pass Filter Built in Variable Low-Pass Filter (50Hz-200Hz, -24dB/oct)
High-Pass Filter A/B
High-Pass Filter Built in Variable High-Pass Filter (50Hz-200Hz, -12dB/oct)
Bass Boost Sub
Built in Bass Boost Control (40Hz, 0dB-18dB)
Infrasonic Filter -
RCA Input Sensitivity 0.2[V] - 5.0 [V]
Speaker Level Input Sensitivity 4.0[V] - 12.0 [V]
Terminals Battery & Ground Wire Clamp Type Terminal Block(M6,Nickel Colored）,Hexagon Screw,Capable for AWG4-AWG6
Speaker Output Wire Clamp Type Terminal Block(M4,Nickel Colored）,Hexagon Screw,Capable for AWG8-AWG16
General Dimensions(WxHxD) (W)9-3/4" x (H) 2-1/16” x (D)6-5/8”
Dimensions(WxHxD) (W) 248mm x (H) 53mm x (D) 169mm
Weight 4.6 lbs ( 2.1 kg)
Operating Voltage 14.4V（11-16V allowable）
Current Consumption 48[A]
Key Features Hi-Res AUDIO Compliant
CTA-2006-D Compliant
Class D
2 Ohms Load Capability
One-Sided Connection
Speaker Level Input
Signal Sensing Turn-on
Remote Level Control　※Input Sensitivity for Sub
Terminal Concealing Cover(Resin Mold)
Power MOS-FET Switching Power Supply
Extruded Aluminum Heat Sink Design
A　B Sub Independent Gain Adjustment
A　B AB(Mix) Independent Gain Adjustment